5 models| Capacity | 130 tons |
|---|---|
| Clamping Force | 1,300 kN |
| Tie Bar Distance | 420 x 420 mm |
| Opening Stroke | 390 mm |
| Injection Speed | 500 mm/s |
| Capacity | 130 tons |
|---|---|
| Clamping Force | 1,300 kN |
| Tie Bar Distance | 420 x 420 mm |
| Opening Stroke | 390 mm |
| Injection Speed | 500 mm/s |
The MX series is a two-platen hybrid-drive series designed for medical and clean room applications. From the drop-down list on this page you can reach all the models between 130 and 450 Tons.
In the MX, the movements that need precision are handled by servo all-electric drive and those that need high force by hydraulics. The two-platen design shortens the frame — this matters because in clean room applications the volume occupied is a direct cost. The injection speed rises to the 500 mm/s band.
Medical components, laboratory consumables, optical parts and technical production that requires a clean room. What is decisive is not speed but repeatability: it is essential that thousands of parts come out to the same dimensions.
With the MX, what is decisive is not only the tonnage but the degree of the clean room requirement. If work is to be done in a classified room, whether the machine is set into the wall or positioned entirely inside the room affects the frame size and the tonnage choice together. The layout plan should be settled before the model decision. Tonnage calculation: calculation tools.
In a clean room installation decisions are needed beyond the machine as well: the risk of hydraulic leakage, particle generation and how the machine will be positioned in the room should be settled at the project stage. In general purpose production the precision equipment of the MX raises the cost unnecessarily.
For the other series and tonnage bands see the DKM injection molding machine range page.
In clean room production the position of the auxiliary equipment has to be planned as carefully as the machine: which equipment stays inside the room, which outside, how the raw material enters the room, at which points particles will be generated. These decisions are the hardest to change after installation.
On the raw material side, closed conveying and closed containers are mandatory; the details are on the central material feeding page.
| Capacity | 130 tons |
| Clamping Force | 1,300 kN |
| Tie Bar Distance | 420 x 420 mm |
| Opening Stroke | 390 mm |
| Injection Speed | 500 mm/s |
Let us determine the solution that best fits your production line. Fill in the form and our expert team will get back to you as soon as possible.
Fill in the form and our expert team will get back to you as soon as possible.