Plastics Industry Products

Which link of your production line?

In plastic injection molding, the machine is not the only thing that determines part quality. Before the material reaches the machine it is conveyed, dried and dosed; the mold is temperature-controlled, the hot runner is controlled and the mold is clamped to the machine. If one of these links is weak, even the best machine produces faulty parts. Our product range covers this entire chain.

• Injection molding machines — 12 series from 90 to 4,000 tons; servo hydraulic, hybrid and all-electric options: plastic injection molding machines
• Material conveying — central vacuum conveying, loaders, pipe and hose lines: central conveying systems
• Drying — dry air for hygroscopic material, hot air for PE/PP: plastic material dryers
• Dosing — weigh-based control of the color, masterbatch and additive ratio: gravimetric dosing
• Mold temperature control — water and oil based, 90 – 300 °C: mold temperature control units
• Hot runner control — from 1 zone to 240 zones: hot runner systems
• Mold clamping — magnetic platens and hydraulic clamps: quick mold clamping
• Metal protection — separators that protect the screw and the mold: metal separation systems

What to look for when choosing

The most common mistake in equipment selection is sizing capacity not to today's need but to an estimated growth. An oversized machine permanently raises both the investment and the energy cost; an oversized dryer keeps the material waiting until it degrades. The right approach is to measure current production and leave a reasonable safety margin.

If you want to calculate with your own values, on the plastic injection molding calculators page you can calculate tonnage, screw capacity, plasticizing, cooling time and cost per part. For product selection and line planning, you can contact our technical support team.