Machinery, Equipment and
Spare Part Solutions
As the Turkish representative of leading European manufacturers, we supply the equipment and technical support that keep your production line running.
A Complete Equipment Range
for Your Production Line
Plastic Injection Molding Machines
New and used plastic injection molding machines
Central Material Conveying and Loading Systems
Automatic material conveying from silo and big bag to the machines
Gravimetric Dosing Systems
Color Dosing and Regrind Dosing for Plastic Raw Material
Volumetric Dosing Systems
Masterbatch, Additive and Regrind Dosing
Plastic Material Drying Systems
Machine-side and central material drying systems
Mold Temperature Control Units
Water-based and oil-based mold temperature control units
Hot Runner Control Systems
Hot runner control units and valve gate systems
Quick Mold Change, Magnetic and Hydraulic Systems
Electro-permanent magnetic and hydraulic quick mold clamping and change
MuCell Weight Reduction Technologies
Weight reduction with nitrogen gas injection and MuCell
Material Storage and Containers
Stainless Steel Granulate Containers and Bag Dump Stations
Plastic Granulators
Granulators for runners, scrap and finished parts
Conveyor Systems
Custom-built belt conveyors for the injection molding line
Magnets and Metal Separation Systems
Permanent magnets and magnetic separators
Nozzle System
Shut-Off, Filter and Mixing Nozzle Solutions
Blow Molding Product Cooling
Internal Cooling with Chilled Compressed Air
On Site
Real Installations
Machines and systems we have commissioned on production lines across Turkey — engineering proven in the field.
Popular Products
DKM Plastik Makineleri
DKM Plastik Makineleri
EAS Europe B.V.
EAS Europe B.V.
RUMMEL
Ferlin Plastics Automation
Ferlin Plastics Automation
Ferlin Plastics Automation
Ferlin Plastics Automation
FIEGE Electronic
MENSINK Magnetics
Michel Tube EngineeringThe machine is one link in the line
On an injection molding line, material preparation and mold preparation are completed before the job reaches the machine. When a part goes wrong the machine is usually the first place people look — yet the cause is more often in a link before it.
An inventory of 1,275 parts, searchable by manufacturer code
From seals to hydraulic pumps, from sensors to control modules — parts from 46 different manufacturers are listed. Every row shows the manufacturer name, the manufacturer code and the dimensions, so you can search directly for the code you have.
O-rings and Back-up Rings361 parts
Position Sensors71 parts
Control Modules58 parts
Directional Valves36 parts
Guide Carriages (Linear Bearings)34 parts
Hydraulic Motors29 parts
Variable Displacement Pumps16 parts
Electronic Cards and Displays11 partsTechnical Guides and Articles
Your Reliable
Solution Partner
With more than 22 years of our founding team's experience in the plastics injection industry, we answer every requirement — from the machine to the spare part, from installation to training — from a single point of contact.
Engineering Support
Selection of the right equipment for your line, process optimization and technical consulting.
More →Installation & Commissioning
Professional on-site installation, commissioning and operator training — turnkey solutions.
More →Spare Parts & Service
Continuity in production through a broad stock and original spare parts.
More →Training & Round-the-Clock Support
Operator training plus phone and on-site technical support to minimize your downtime.
More →Calculators
The tonnage factor is derived from this thickness: 1.00 (1 mm and below 1.35, 3 mm 1.00, 5 mm and above 0.85). If the flow length is long, work near the upper end of the band.
The choice of series depends on the application as well as the tonnage — there are separate series for fast packaging, medical, PET and PVC.
If you have a 3D file of the part you do not need to measure the area — upload the STL on the 3D File tab and the projected area and volume are calculated automatically.
These calculations produce guide values; the final selection has to be based on the part geometry, the mold design and the data from the material manufacturer. For an assessment specific to your application, contact our technical support team.
How is this calculated?
During injection the melt generates a force that tries to open the mold. That force is the projected area of the part perpendicular to the parting line multiplied by the cavity pressure. The clamping force of the machine has to exceed it; otherwise the mold opens by a few microns and flash appears.
The coefficient falls in the 0.3 – 0.8 t/cm² band depending on the material and the type of part: low for easy-flowing materials (PE, PP), high for high-viscosity ones (PC, PMMA). The larger the flow length / wall thickness ratio, the higher the pressure needed — that is why thin-wall packaging sits near the upper end of the band. Fillers such as glass fiber raise the viscosity, so the additive content enters the calculation as a factor too. A safety margin of 10 – 20% is added to the result.
Let Us Strengthen
Your Production Line
Get in touch with our specialist team for the machinery and spare parts you need.
Request a Quote
Fill in the form and our team will get back to you as soon as possible.