15 modelsFast injection - 90-3350 tons. 30-50% shorter cycle with electric pre-plasticizing and a self-locking nozzle. For thin-walled products.
DKM-DH Series — Fast Injection Molding Machines (90-3350 Tons)
The DKM-DH series (DKM Lightning Machine) has been updated with an electric pre-plasticizing system and a self-locking nozzle that provide a 30-50% shorter cycle than servo motor machines. Ideal for high volume products requiring short cycles: daily consumer goods, paint buckets, transport crates and the like.
General Specifications
| Feature | Value |
|---|---|
| Clamping Force | 900-33,500 kN (90-3350 tons) |
| Structure | Toggle (Three-Platen) |
| Drive | Servo motor + electric pre-plasticizing |
| Injection Speed | 250 mm/s (130-650 tons) / 150 mm/s (850-4000 tons) |
| Nozzle | Self-locking |
Capacity and Clamping Force
DKM-DH series machines offer clamping forces suited to various production requirements across a wide capacity range from 90 tons to 3350 tons. When selecting a machine it is important to pay attention to the capacity the product to be made requires.
Injection Speed and Pressure
The DKM-DH series is designed for high speed injection molding. Thanks to the combination of fast injection speed + high pressure:
- Short cycle times
- High production efficiency
- Lower unit cost
Precision and Quality
The DKM-DH series is designed for precision injection molding; it aims to produce high quality parts with a minimum defect rate. Thanks to the advanced injection control system and the professional single cylinder injection system with a servo valve, a fast response time and precise quality are guaranteed.
Customization
DKM-DH series machines can be customized according to specific production requirements. This provides more flexibility and efficiency in the production process; the machines can be adapted to the special requirements of the product.
Maintenance and Long Life
The DKM-DH series requires regular maintenance and lubrication for optimum performance and a long life. Following the maintenance schedule recommended by the manufacturer and keeping the machine clean prevents damage to the parts.
Safety Measures
A DKM-DH series injection molding machine is powerful and complex equipment; safety measures have to be observed. It is advised that appropriate training and certification be obtained before operating the machine, and that the safety procedures recommended by the manufacturer be followed.
Advantages
- Fast Cycle — 30-50% shorter, fast payback
- Thin-Wall Production — high speed injection, precise dimensional control
- Electric Pre-Plasticizing — simultaneous plasticizing, energy efficiency
- Self-Locking Nozzle — stable injection, no drooling
- Wide Tonnage Range — from 90 tons to 3350 tons
Fields of Application
- Daily consumer products (buckets, boxes, lids)
- Paint buckets and industrial packaging
- Transport crates
- Thin-walled plastic packaging
- High volume plastic part production
DH shortens the cycle time with its electric pre-plasticizing. To assess all-electric or low-inertia alternatives at the same tonnage, compare the injection molding machine series.